Precautions for installing ductile iron pipe fittings in summer

May 09, 2022

First: during construction in summer, it is better to cover some drawings appropriately at the joints of the pipes, so as to prevent the sun from being too strong and causing cracks at the joints.

Second: When filling the trench, it needs to be compacted in layers, so that the soil at the pipe will not be too soft, causing the pipe to tilt; In order that the ductile iron pipe will not be crushed.

Third: In some construction places, there is not enough water source for pressure test. At this time, we can choose to use air to test.

Fourth: In hot weather, when applying lubricating oil, it is best to use vegetable oil, which can be used in a good pipeline; in winter, you can use hot water for preheating and installation.

Fifth: To prevent the leakage of the interface during the construction process, it is necessary to carry out the construction according to the specifications during installation, so that each pipe can be installed in place. Whether it is a large-diameter or a small-diameter, strict inspection of the rubber ring is required.

Sixth: You can soak the rubber ring with water first to make the installation of the pipeline quickest and easiest. If the pipeline needs to be borrowed, but it does not meet the conditions, it is necessary to make cuts according to the angle, so that the transfer can be carried out with the help of the angle to the greatest extent, so that the pipeline can be used in the future.


Send Inquiry