Your Professional Valve Manufacturer
Taiyuan Haizhuo Industrial Trade Co.,Ltd. (THIT) is located in Taiyuan City, Shanxi Province, China. Our Portfolio including three parts as follows: Piping Products covers the pipes of different materials used for transmission line, distribution line, household connection and service line. Building Materials covers materials of various usage for building works. Vehicles, Machineries and Instruments covers the tools used to mobilize, construct, install, commission and test the material and works in project.
Why Choose Us
01/
Rich Experience
THIT More Than 10 Years Experience in the sector of water and wastewater sector. We do not only provide goods required but also engineering, design and aftersales services.
02/
One Stop Supply
THIT is specializing in one stop supply with a full range of products used in the construction, expansion, maintenance and repair works for water supply, wastewater treatment, irrigation and fire fighting system.
03/
One Stop Supply
THIT is specializing in one stop supply with a full range of products used in the construction, expansion, maintenance and repair works for water supply, wastewater treatment, irrigation and fire fighting system.
04/
24H Online Service
Quick Response. We promise to deliver a feedback within 24 working hours after the request from customer.
-
Ductile Cast Iron Gate Valve
Ductile Cast Iron Gate Valve, also known as Ductile Cast Iron Sluice Valve made of Ductile Cast Iron is a valve that opens by lifting a barrier (gate) out of the path of the fluid. Ductile Cast Iron Add to Inquiry -
Ductile Cast Iron Knife Gate Valve
Ductile Cast Iron Knife Gate Valve, made of Ductile Cast Iron, is designed mainly for on-off and isolation services in systems with high content of suspended solids. Knife Gate Valves are especially Add to Inquiry -
Ductile Cast Iron Check Valve
Ductile Cast Iron Check Valve, also known as Non-Return Valve or One-Way Valve is made of Ductile Cast Iron and is a valve that generally allows fluid to flow through it in only one direction. Add to Inquiry -
Ductile Cast Iron Air Release Valve
Ductile Cast Iron Air Release Valve, also known as Air Valve, Air Relief or Air Exhaust Valve is made of Ductile Cast Iron and is a safety valve that is used to control or limit the pressure in the Add to Inquiry -
Ductile Cast Iron Control Valve
Ductile Cast Iron Control Valves made of Ductile Cast Iron is an automated valve that can make precise adjustments to regulate and monitor any commodity flowing through a piping system. The function Add to Inquiry -
Ductile Cast Iron Strainer
Ductile Cast Iron Strainer made of Ductile Cast Iron is designed to mechanically remove solids and other particles from fluids. They are an essential component in numerous fluid control applications Add to Inquiry -
Ductile Cast Iron Hydrant
Ductile Cast Iron Hydrant made of Ductile Cast Iron is used in and connected to water supply pipe system to carry water, it could be installed above or underground, and it is widely used in fire Add to Inquiry
Features & Benefits of Valve
Highest quality machined valves & stainless steel fittings for critical systems; both compact and mighty, and designed to withstand the most demanding conditions across various industries.
Wide range of product lines to encompass the fullest extent of industrial processes – for pressure, temperature, flow, ease of installation, reliability, and worry-free operation.
Soft Sealing mechanism for all valves,ensuring leak-proof bubble-tight shutoff every time.
Unique O-Ring Face Seal Union-type connections for various products ensure maximum reliability and optimum flexibility for high pressure liquid and gas systems.
Quick installation/slip-in and slip-out assembly
Shock & vibration resistant components
Easy to replace self-energizing o-ring seal
Valve & fitting pressure ratings from vacuum to 6,000 PSI in various water, oil & gas industrial processes.
Adaptable products for many growing industries, with continued research & development of new reliable, robust designs.
Common Materials Used in Industrial Valve Manufacturing
In the world of industrial valve manufacturing, the choice of material is crucial since it determines how well the valve performs in specific situations and environments. With different applications and performance requirements in mind, several materials are commonly used. As we explore these materials, we'll also discuss the various scenarios and conditions they are best suited for.
|
Material |
Applications |
Industries/Scenarios |
|
Cast Iron |
Low-pressure handling of water, steam, and gas |
General-purpose, wide range of industries |
|
Ductile Iron |
High-pressure and high-stress applications |
Waterworks, oil and gas |
|
Carbon Steel |
High-pressure, high-temperature operations |
Power generation, oil refining |
|
Stainless Steel |
Valves handling corrosive fluids, chemicals, and environments |
Food processing, pharmaceutical, chemical |
|
Brass |
Low to medium pressure applications involving water, oil, or gas |
Plumbing systems, residential or commercial |
|
Bronze |
Corrosion and wear-resistant applications, high strength and ductility requirements |
Marine, water and gas industries |
|
Alloy Steels |
High-temperature, high-strength, and durable valves |
Power plants, energy sectors |
|
Special Alloys |
Extremely high temperature, corrosion-resistant applications, unique properties requirements |
Chemical processing plants, nuclear power facilities |
Understanding Valve Sizes and Measurement
Understanding the measurement of valves is essential for selecting the appropriate valve for a given application. Valves are generally measured according to their connection size and type. Moreover, dimensions that are crucial to the operation and compatibility of valves within a piping system are of significant importance.
What are Common Units of Measurement for Valves?
Valves can be quantified using various units depending on the measurement of interest. The most common units of measurement include the following:
Inches (in) or millimeters (mm) for dimensions such as diameter, length, and height.
in² or mm² for the flow area or orifice area of the valve.
Pressure ratings are in pounds per square inch (psi) or bars (bar).
Recommendations for Sizing Valves
Following are some recommendations concerning valve sizing:
Refer to the sizing charts provided by the manufacturers: Valve manufacturers provide sizing charts based on flow rate, application, and material that make selecting a valve easier.
Use advanced valve sizing software: Software packages can be used that calculate system requirements and suggest the best sizes. These are especially useful for control valves.
Seek advice: In doubt over any matter, an engineer or any other valve system professional could be consulted. Advice would be given on certain needs and application of the system.
Valve Sizes & Measurement
Proper valve selection requires a deep consideration of valve sizing. Once the principle of valve sizing and how sizes are measured is understood, your selection will perfectly match your system's needs. Remember, it is not about finding a valve that fits but finding one that will work properly in your environment. This way, you will achieve optimal performance and duration for your system.
Specification For Minimum Thickness the Shell of Valves
This standard specifies the shell thickness requirements for ball valves, butterfly valves, gate valves, globe valves, check valves, plug valves and diaphragm valves made of iron and steel.
This Standard applies to valves with parameter range of:
●Steel valves with nominal pressure of PN 10 – PN 760, nominal pressure of PN 760 is only applicable to welding-end valves;
●Flanged-end, wafer-end and butt-welding-end steel valves with nominal diameter not exceeding DN 1250 ;
●Socketed welding-end and threaded-end steel valves with nominal diameter not exceeding DN 100;
●Iron valves with nominal pressure of PN 1.0 ~ PN 25;
●Iron valves with nominal diameter not exceeding DN 3000.
Industrial Valve Design and Construction
The design and construction of industrial valves are essential in ensuring their functionality, durability, and efficiency. Valve designs typically depend on the specific application, accessories, fluid properties, and operational requirements. Some common types of industrial valves include gate valves, globe valves, ball valves, butterfly valves, and check valves, among others.
Once the design is finalized, the valve manufacturing process begins, which involves several stages, including material procurement, machining, heat treatment, and welding.
Production Process
Valve manufacturing employs various processes, with two of the most popular methods. Each technique has its unique characteristics, advantages, and disadvantages. Let's explore each method's pros and cons to better through the following content.
Casting Method
The casting method is a preferred technique for many valve manufacturers due to its ability to create intricate shapes and designs.
Forging Method
The forging method offers an alternative approach to valve manufacturing, valued for the increased strength and durability it provides.
Importance of Surface Finishing Valves
Valves are critical components in a wide range of industrial applications, including oil and gas, chemical processing, water treatment, and many others. Proper sealing of valves is essential to prevent leaks that can lead to loss of product, environmental hazards, or even equipment failure.
Surface finishing valves play a critical role in ensuring that the sealing surfaces of valves are smooth, flat, and free of imperfections. This helps to create a tight seal between the valve body and the sealing surfaces, preventing leaks and ensuring optimal performance. Surface finishing also helps to increase the durability and longevity of valves by reducing wear and tear on the sealing surfaces. By creating a smoother surface, the valve will experience less friction during operation, leading to reduced wear and tear on the sealing surfaces.
In addition to improving performance and durability, surface finishing can also help to improve the aesthetics of valves. A well-finished valve not only looks better, but it also reflects the quality and precision of the manufacturing process.
Lapping and Polishing
Lapping and polishing are two of the most commonly used techniques for surface finishing valves. These techniques involve the use of abrasive materials to remove imperfections and create a smooth surface finish. Lapping is a technique that involves rubbing two surfaces together with an abrasive material to create a smooth surface finish. It is a precision process that requires careful control of the pressure and speed at which the surfaces are rubbed together. Polishing, on the other hand, is a process that involves the use of a polishing compound and a rotating polishing wheel to create a smooth surface finish. Polishing is typically used after lapping to achieve a mirror-like finish.
One of the key advantages of lapping and polishing is that they can be used to achieve extremely high levels of precision. This is especially important for valve components that require tight tolerances to ensure proper operation. Lapping and polishing can also be used to remove imperfections such as burrs, scratches, and other surface defects that can impact the performance of the valve. By removing these imperfections, lapping and polishing can improve the sealing properties of the valve, resulting in better performance and reduced maintenance costs.
Quality Assurance Tests of Valve
We understand that part of being globally competitive is to provide continuous quality control and supervision. Our on-site plant is equipped with testing machines that will ensure that each valve we release is the best.
- Material testing machine
- Thickness gauge machine
- Impact testing machine
- Magnetic particles machine
- Hardness tester
- NDE test equipment
- Tensile testing machine
Getting it Right and Getting it On Time is Critical
When you're choosing crucial operational equipment such as pressure relief valves, getting it right is imperative, but getting it on time is just as critical.
we utilize our extensive knowledge and expertise to manufacture and supply the right product, to keep your people and equipment safe, and your process on track.
Whether you need solutions for mission-critical military uses or rugged commercial and industrial applications, we're engineered to deliver nothing less than the best.
Our unending commitment to quality ensures product reliability is never left to chance.
High pressure situations call for the best in technical support.
Our large product inventory ensures your project stays on track and prevents costly scheduling delays.
Our Certifications
FAQ
We're well-known as one of the leading valve manufacturers and suppliers in China. Please feel free to buy high quality valve for sale here from our factory. For price consultation, contact us.
Ductile Cast Iron Knife Gate Valve