The characteristics of the gear coupling and its removal function

Jun 26, 2023

The gear coupling has the function of compensating the relative offset of the two shafts in a certain angular direction, as well as the long-distance operation of the central shaft, the operating ambient temperature is -20-+80°C, and the transmitted nominal torque is 0.4-4500kn.m . Gear coupling is suitable for connecting two horizontal coaxial lines and drive shaft systems with a certain angular displacement. The gear coupling has a small radial dimension and a large load capacity. They are generally used for shafting transmissions under low speed and heavy conditions. High-precision and dynamically balanced gear couplings can be used for high-speed transmissions, such as gas turbine gaskets. spread.2

Therefore, the gear coupling needs to work in a well-sealed state. The gear coupling has a small radial dimension and a large load capacity. They are generally used for shafting transmissions under low speed and heavy conditions. High-precision and dynamically balanced gear couplings can be used for high-speed transmissions, such as gas turbine gaskets. spread. By heating, the gap between the nut and the bolt expands, the rust is also easy to fall off, and the bolt removal becomes easier. If none of the above methods work, the only option is to damage the bolts, cut or drill the bolts, and replace them with new ones during assembly. New bolts must have the same specifications as the original bolts. New bolts for high speed equipment coupling must also be weighed so that the new bolts have the same weight as the connecting bolts on the same flange. Coupling should be chosen. Factors to consider.

Gear coupling is suitable for connecting two horizontal coaxial lines and drive shaft systems with a certain angular displacement. The GCLZ type is appropriate when the two axis ends are far apart. The gear coupling is characterized by a strong load-carrying capacity. Under the same inner gear casing outer diameter and larger coupling outer diameter, the bearing capacity of the gear coupling is even 15-20 higher than that of the spur gear coupling. %; The gear coupling can allow greater angular displacement (compared with straight tooth coupling), which can improve the contact conditions of the teeth, increase the ability to transmit torque, and prolong the service life. contact status.

Because the angle compensation of the drum gear coupling is greater than that of the spur gear coupling, the drum gear coupling is widely used at home and abroad. Spur gear couplings are obsolete products, and those who choose should try not to use them. The gear coupling consists of an internal ring gear with the same number of teeth as the external teeth and a flange half coupling. The outer teeth are divided into spur teeth and cylindrical teeth. The so-called crowned tooth means that the outer tooth is made into a spherical surface. The center of the spherical surface is located on the gear shaft, and the backlash of the teeth is larger than that of ordinary gears. When the gear coupling works, the two shafts produce relative angular displacement, and the tooth surfaces of the inner teeth periodically slide relative to each other in the axial direction, which will inevitably cause tooth surface wear and power consumption.
 
 

Send Inquiry